Old forum Archive
This is where all the topics from the old forum that was shutdown are saved in a read-only forum. You can refer to it on this forum by using a link or copying the data over.
http://archive.aluminiumcamperforum.com/

Author Topic: Lippert Flex-Air Fifth Wheel Pin Box  (Read 1938 times)

jlcere

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
    • TV and RV:
      GMC Sierra 2014

    • Camplite 32 RLS
    • View Profile
Lippert Flex-Air Fifth Wheel Pin Box
« on: February 11, 2017, 01:41:09 AM »
Does any one already used Lippert Flex-Air Fifth Wheel Pin Box ?
http://www.lci1.com/flex-air-pin-box

I would like to have your comments...

Thanks




djsamuel

  • Full Member
  • ***
  • Posts: 164
  • Karma: +3/-0
    • TV and RV:
      Ram 1500

    • Camplite 21BHS
    • View Profile
Re: Lippert Flex-Air Fifth Wheel Pin Box
« Reply #1 on: February 11, 2017, 10:13:22 AM »
You may want to post on the good sam forum or one of the other larger camping forums since this can be used with multiple brands of fifth wheels.  Not too many LivinLite fifth wheels out there, so the chances of finding someone using this are much smaller.

TLBones

  • Newbie
  • *
  • Posts: 24
  • Karma: +0/-0
    • TV and RV:
      Ford F250 CCLB

    • Camplite 28RLS
    • View Profile
Re: Lippert Flex-Air Fifth Wheel Pin Box
« Reply #2 on: February 11, 2017, 03:07:52 PM »
Regardless of the hitch make sure you get one with the right pin-pattern I think ours are 1.5 x 8.   Many are 2 x 8 or 2.5 x8.   Also pay attention to the length from hitch pin to bolt pattern.   Getting something shorter may limit your turning.    I looked around a bit early on but didn't find anything I liked.     I don't get much chuck with mine so am living with it.    It's not as plug and play as it might seem at first glance.
« Last Edit: February 11, 2017, 07:07:25 PM by TLBones »

TLBones

  • Newbie
  • *
  • Posts: 24
  • Karma: +0/-0
    • TV and RV:
      Ford F250 CCLB

    • Camplite 28RLS
    • View Profile
Re: Lippert Flex-Air Fifth Wheel Pin Box
« Reply #3 on: February 15, 2017, 07:27:57 PM »