16 TBS break shoes ?

[Jim T]

Does anyone know the size of the break shoes needed for replacement on a 16 TBS 2016 model year? 14 inch wheels.
Looking to replace mine maybe ,but cant seem to get the information needed on them. I think they are 2 x 10 but I'm not 100% sure. Also called Sunny Island RV where I bought it from , but they did not know and they said they would ask Livin Lite , but I have not heard back from them. A part number or just a general size would be of great help.

Thanks

[ADR]

If you have a Dexter axle somewhere near the center of the axle is a label that gives info on the axle.  Can't recall if it gives brake size but it does give the build number of the axle and Dexter can tell you what brakes are on it.
Calling Dexter has always been a good experience.

[Jim T]

Thanks ADR

I will have to crawl under there and see if I can get that information. Shame it is not listed in the book.

Jim T

[gibby]

I am in a similar boat RV (although for a 21RBS), wheel service (times 4) over the next while. I too need at least to get some seals, but also need to know about brake parts.

I just took a picture of the axle placard and it does not give information about the brake size. I am quite sure it is 10" but the question is 1.5 or 2.25" wide pads (gut says 2.25").

Since the place I get parts is not open on the weekend, I need to get what I need during the week. So the plan is to pull the wheels off this weekend, look at the brakes and magnets (are they good?), measure the brake (now I know all that I need). Get the parts next week, seals for sure, brakes if needed, and a couple of sets of bearings (just in case, they keep). Then on the May long weekend, I can do the work, along with flush the water and test everything.

[Merlin]

I suggest calling Etrailer. They are really good at customer service and will be able to get you what you need fast. They will know what to ask you to figure out what you need for the 21. I use them for all my RV/boat/utility trailer parts needs