Help... water heater won't light

Started by mojospeople, April 08, 2017, 01:49:56 PM

Previous topic - Next topic

gbpack


Pinstriper

Quote from: Merlin on April 08, 2017, 10:58:17 PM
Quote from: charliem on April 08, 2017, 06:46:18 PM
If the WH shuts down after 10 minutes, does not try to reignite, but fires up an hour later it sounds like all is working fine. I'm wondering if the WH is really heating properly and satisfying the thermostat but the WH bypass valves are set improperly giving you the impression the water is not hot. If you're plugged into 30A the electric side of the WH should work fine and you should get HOT water.


Winner of the "Daily Trouble-Shooting Award" for every day this week.  ;D

Indeed. Actual troubleshooting based on the symptoms, isolating the point of failure, devising a test to narrow it down. Textbook. (as opposed to the usual "guess-change-guess-change" cycle)

charliem

Quote from: mojospeople on April 08, 2017, 06:58:42 PM
Bingo! Forgot to close the middle bypass valve so cold was mixing with the hot, thermostat keeps it from lighting and the random light isn't when the tank drops below temp. Thanks! I can take a shower now!

Sent from my SM-G930P using Tapatalk
Glad you found the problem. I was running out of ideas. When something stops working I always ask two questions: What changed and could it be a short between the headphones? Camp on!  8)
Any 20 minute job can be stretched to a week with proper planning

Charlie
Northern Colorado
2014 21RBS
2013 Tacoma supercharged 4.0L V6
E2 WDH, P3 controller

mojospeople

Thanks me too! This problem was a combination of both... Something changed and user error. Or in my profession we have the picnic error... Problem In Chair Not In Computer.

Sent from my SM-G930P using Tapatalk