Hi guys. We're getting ready to embark on a long summer camping trip and I thought it would be prudent to know how to manually move the Schwintek slide in or out if one (or more) of the motors aren't working. Can any of you tell me what the steps are to do this? I believe the slide control until is above the refrigerator in our CampLite 21BHS. Thank you!
See the attachment. Basically you remove one bolt holding the motor in place and lift the motor and its pinion gear from the slide rack so it can be pushed manually back inside. Once it is inside you need to block the slide from wiggling back out underway with a 2x4, piece of firewood, etc.
David
Thanks David. I found a video on how to do it as well. Appreciate your quick response.
The video link: https://youtu.be/DviEbWT3lUo
Good videos here too: https://www.youtube.com/c/MyRVWorksInc/videos
Quote from: Chappy133 on May 21, 2021, 11:26:08 AM
The video link: https://youtu.be/DviEbWT3lUo
Good videos here too: https://www.youtube.com/c/MyRVWorksInc/videos
That My RV Works Youtube site is excellent. This video really shows a lot:
https://youtu.be/cxEYSstvICI (https://youtu.be/cxEYSstvICI)
Hi all, We are going to check out a 2014 21BHS on Tuesday. I want to confirm what I'm reading - there is no manual override using a crank. One has to remove motor to manually push back in.
What type of mechanism does the slide use - rack & pinion or worm gear? Ha- I just learned this watching youtube video. But now that I watched it, do you know?
Thx
No manual crank override on mine.