Good morning everyone,
I just replaced the tires on our 13QBB. I had a really hard time removing them since the lug nuts were soooo tight, way too tight. My air impact wrenche couldn't unscrew some of them! So I checked for the proper lug nut torque for the 13" wheel in the Livin Lite owner's manual and they say 75 ft/lbs. That seems a little low don't you think?? I was thinking somewhere around 90 ft/lbs should be perfect but maybe I should stick with what the manual says? What is your experience on this matter?
You need to measure the lugs to see what diameter they are- torque is based on that.
Once you know that look at this chart-
Ok thanks for the chart. I will have a look at the stud size.