Old forum Archive
This is where all the topics from the old forum that was shutdown are saved in a read-only forum. You can refer to it on this forum by using a link or copying the data over.

Author Topic: Thetford o ring replacement  (Read 743 times)


  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0

    • Quicksilver 14XLP
    • View Profile
Thetford o ring replacement
« on: July 18, 2020, 12:01:13 PM »
The pump for the Thetford cassette toilet in my QuickSilver 14XLP seized on me recently.  I was able to get the pump out and get the propeller free so the pump now works.  However when taking the pump out, when I pulled out the cover that seals the fresh water tank for the Thetford toilet, the O ring that was around it cracked and fell off.  I cannot seem to find information on the part number nor what size O ring it is so I can purchase a replacement.  Does anyone know the part number or size or a place to get a replacement O ring?  Since its broken into pieces its hard to get the size of the O ring.

In the attached picture, its part number 44.  However on the web site where I found it, they had no information on that part number.  Also Thetford has no information on the O ring on their site as well.



  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1323
  • Karma: +23/-0
    • TV and RV:
      2017 Land Cruiser

    • 2015 Camplite 16TBS
    • View Profile
Re: Thetford o ring replacement
« Reply #1 on: July 18, 2020, 03:36:05 PM »
I recently had a similar situation attempting to repair a hand water pump. I had no idea about the specific size of the disintegrated o-ring. What I discovered is that 0-rings are cheap and you can get several of various sizes from your local hardware or order a large multi-pack from Amazon for just a few dollars. I suspect one of those will fit. Keep the others for project spares.  ;)