Old forum Archive
This is where all the topics from the old forum that was shutdown are saved in a read-only forum. You can refer to it on this forum by using a link or copying the data over.

Author Topic: Moved TV / cabinet bracing for mounting stuff  (Read 5153 times)


  • Newbie
  • *
  • Posts: 11
  • Karma: +0/-0
    • TV and RV:
      GM 2500HD

    • VRV8.5x24
    • View Profile
Moved TV / cabinet bracing for mounting stuff
« on: May 21, 2019, 01:36:39 PM »
Minor mod but figured I'd share because it might give folks ideas on how to mount stuff to existing cabinets.

The TV in the 24 foot TH is located on the middle of the long side wall which made it not easily visible from one of the couches. I moved the TV to the end wall to fix this problem. To mount it I made a backing board out of plywood to fasten in between the cabinet's aluminum framing using pocket screw method. Once I did the TV, i decided to add a couple more supports between 2 other cabinets so I could install a clothing rail for racing suits.

I included a pic of the size of self-taping sheet metal screws I used for the pocket holes; they worked perfect. A normal wood pocket screw is also in the pic for comparison. I did also add another main (larger) screw thru cabinet frame into wall stud just to beef it up a bit more
« Last Edit: May 21, 2019, 01:42:08 PM by keeena »


  • Administrator
  • Hero Member
  • *****
  • Posts: 863
  • Karma: +15/-0
    • TV and RV:
      2018 Ford F150

    • 2018 Camplite 21BHS
    • View Profile
Re: Moved TV / cabinet bracing for mounting stuff
« Reply #1 on: May 23, 2019, 04:16:08 PM »
The clothing rail is a nice addition! Nice work for the TV
2014 Ford Escape
2015 Camplite 13QBB
2016 Ford F150
2018 Ford F150
2018 Camplite 21BHS