Print Page - Lippert Flex-Air Fifth Wheel Pin Box

Title: Lippert Flex-Air Fifth Wheel Pin Box
Post by: jlcere on February 11, 2017, 01:41:09 AM

Does any one already used Lippert Flex-Air Fifth Wheel Pin Box ?
http://www.lci1.com/flex-air-pin-box

I would like to have your comments...

Thanks

(http://www.lci1.com/assets/content/img/gen/640_601_Flex_Air_Poses_shock_v1.jpg)

Title: Re: Lippert Flex-Air Fifth Wheel Pin Box
Post by: djsamuel on February 11, 2017, 10:13:22 AM

You may want to post on the good sam forum or one of the other larger camping forums since this can be used with multiple brands of fifth wheels. Not too many LivinLite fifth wheels out there, so the chances of finding someone using this are much smaller.

Title: Re: Lippert Flex-Air Fifth Wheel Pin Box
Post by: TLBones on February 11, 2017, 03:07:52 PM

Regardless of the hitch make sure you get one with the right pin-pattern I think ours are 1.5 x 8. Many are 2 x 8 or 2.5 x8. Also pay attention to the length from hitch pin to bolt pattern. Getting something shorter may limit your turning. I looked around a bit early on but didn't find anything I liked. I don't get much chuck with mine so am living with it. It's not as plug and play as it might seem at first glance.

Title: Re: Lippert Flex-Air Fifth Wheel Pin Box
Post by: TLBones on February 15, 2017, 07:27:57 PM

Check out the handy guide from etrailer:

https://www.etrailer.com/faq-measuring-a-fifth-wheel-pin-box.aspx

Aluminum Camper Forum

Livin Lite Forum => Camplite Fifth Wheels => Topic started by: jlcere on February 11, 2017, 01:41:09 AM